Solenoid valves for precise gas control

Solenoid valves

Thermobile solenoid valves offer precise control of gas flow, essential for the safety and efficiency of your installation.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Solenoid valves models

Compare Performances

Solenoid valve - Nat.gas/Propane, 230V, 3/4" 150mb

More information

Solenoid valve - Propane, 24V ac, 1/2"

More information

Solenoid valve - Propane, 24V dc, 1/2"

More information

Solenoid valve - Propane, 230V, 1"

More information

Solenoid valve - Propane, 230V ac, 1/2"

More information

Performance Chart

	Solenoid valve - Propane, 230V ac, 1/2"	Solenoid valve - Propane, 24V ac, 1/2"	Solenoid valve - Propane, 230V, 1"	Solenoid valve - Propane, 24V dc, 1/2"	Solenoid valve - Nat.gas/Propane, 230V, 3/4" 150mb

Heat calculator

Calculate how much kW is needed for a specific room.

Length [m]

Width [m]

Height [m]

Desired room temperature [°C]

Temperature outside [°C]

K value [W/m²]

Ventilation [x per hour]

Air blow [m³/u]

Ventilation [x per hour]

Air blow [m³/u]

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.