Fastening sets for Thermobile systems

Mounting kits

Mounting kits from Thermobile contain everything you need to securely and safely mount your equipment, for both fixed and mobile applications.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Mounting kits models

Compare Performances

Performance Chart

	Wall bracket - GA-60/85/110	Floor/wall bracket - GA-24/42

Heat calculator

Calculate how much kW is needed for a specific room.

Length [m]

Width [m]

Height [m]

Desired room temperature [°C]

Temperature outside [°C]

K value [W/m²]

Ventilation [x per hour]

Air blow [m³/u]

Ventilation [x per hour]

Air blow [m³/u]

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.