Plug-in thermostats for Thermobile systems

Insert thermostats

Thermobile insert thermostats are designed for direct installation in heating systems. They provide reliable control and ensure optimum performance, making your system operate efficiently.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Insert thermostats models

Compare Performances

IT-1 - Insert thermostat, 0/100°C, 6m

More information

Performance Chart

	IT-1 - Insert thermostat, 0/100°C, 6m
Setting Range (°C)	0/100
Cable Length (m)	6

Heat calculator

Calculate how much kW is needed for a specific room.

Length [m]

Width [m]

Height [m]

Desired room temperature [°C]

Temperature outside [°C]

K value [W/m²]

Ventilation [x per hour]

Air blow [m³/u]

Ventilation [x per hour]

Air blow [m³/u]

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.