Fresh Air Intake for Optimal Air Supply

Fresh Air Intake

Thermobile fresh air intake systems are designed to supply your heating system with fresh outdoor air. This improves combustion and contributes to cleaner indoor air circulation.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Fresh Air Intake models

Compare Performances

Outside air duct - GA/AGA/TAS + Rain cover

More information

Outside air intake hose - GA/AGA/TAS, Ø100, 10 m

More information

Outside air intake set - GA/AGA/TAS, Ø100mm, 10m

More information

Performance Chart

	Outside air intake set - GA/AGA/TAS, Ø100mm, 10m	Outside air duct - GA/AGA/TAS + Rain cover	Outside air intake hose - GA/AGA/TAS, Ø100, 10 m

Heat calculator

Calculate how much kW is needed for a specific room.

Length [m]

Width [m]

Height [m]

Desired room temperature [°C]

Temperature outside [°C]

K value [W/m²]

Ventilation [x per hour]

Air blow [m³/u]

Ventilation [x per hour]

Air blow [m³/u]

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.